Canon MPC190

•August 30, 2010 • Leave a Comment

Canon MPC190
Reset Waste Ink
1) Masuk ke SERVICE MODE. dengan menekan Menu, Copy, Scan, Copy, Copy
2) Pilih TEST MODE.
4) Pilih 3. [EEPROM CLEAR].
5) Piliht 0. [INK COUNT].
6) Tekan tombol [Set]
7) Tekan tombol [Stop/Reset] , kemudian tekan tombol [ON/OFF]


Epson CX2800 adjustment

•August 28, 2010 • Leave a Comment
Reset Canon i6100
Reset Canon i6100

* Turn off the printer.
* Press and hold the RESUME button, then press and hold the POWER button.
* Release the RESUME button, next press and release the RESUME button two(2) more times in succession, then release the POWER button.
* Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press. download resetter here

1. Service/Factory test printout, including ink sensor check.
2. EEPROM – Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting.

How to reset Epson CX6500 or any multifunction

•August 24, 2010 • Leave a Comment

How to reset Epson CX6500 or any multifunction:

* Press and hold B/W+COLOR+STOP

* Push power on button, don’t release all the button until you see the light indicator is blinking and then a message display on the LCD

* Release your fingers from the button

* Press the COLOR button to clear protection counter

* Press power button (turn off)


Reset Waste Ink Counter Canon Pixma i320, i255

•August 23, 2010 • Leave a Comment

Waste Ink Counter Reset.
Langkah 1: Manual for Service mode
1. Lepaskan kabel Power dan USB
2. Tekan dan tahan tombol POWER dan colok kabel POWER
3. Tekan tombol RESUME 2x, kemudian lepas keduanya
4. Colok kabel USB

Lankah 2 : Software untuk Reset Permanant

1. Klik link di bawah ini
2. Download General Tools i255, pilih (USB PORT)
4. Masukkan kertas dan printer akan mencetak printout data EEPROM dan melakukan test printhead utk semua nozzle (hitam dan warna)
5. Matikan printer.

Step 1 : Manual for Service Mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
7. Connect USB cable
Step 2 : Software for permanent reset

1. Reconnect the printer cable.
2.Open General Tools i255 and select (USB PORT)
3 .Check on EEPROM CLEAR

Reset Ink Tank Full Error Canon IP1300 dan IP1700

•August 23, 2010 • Leave a Comment

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

Download Reset : Download

reset canon BJC 1000 Series

•August 23, 2010 • Leave a Comment

reset canon BJC 1000 Series
Canon Waste Ink Tank Reset Procedures
1: Remove Cartridge2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within
5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
How to reset MPC 110/130
* Turn On the printer
* Press “MENU – SCAN – COPY – SCAN”
* Press +
* Press –
* Reset level press +
* Press OK
* Press –
* Reset level press +
* Press MENU and EXIT
* Turn off the printer
Reset printer Canon BJC-2000 BJC-2100
Reset Waste Ink Canon
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within
7. Seconds and release the RESUME/RESET .
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Press and HOLD RESUME/RESET for two seconds or more and release it.
10.Unplug AC Power Cord to set data.
Reset printer Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses – light color – function

Number of presses – light color – function
0 presses – green – Test print (or exit service mode on i960)
1 press – orange – EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses – green – EEPROM initialize
3 presses – orange – Reset waste ink counter
Epson Stylus Color C20,C40

Since your printer consumes ink not only for printing but also for other operations like cleaning, a certain amount of ink is wasted and it is collected by the waste ink pad. Therefore, the printer counts the amount of waste ink.
Once the amount of waste ink reaches the predefined limit, the printer indicates “MAINTENANCE REQUEST” and the waste ink pad should be replaced. Also, you must reset the maintenance error condition and the waste ink counter value stored in EEPROM on the mainbord of the printer.

The adjustment program enables you to perform maintenance and adjustment functions such as:

– EEPROM initial setting
– Ink Pad Counter reset
– Initial Ink Charge
– Head ID Setting
– Top margin Adjustment
– Bi-D Adjustment
– USB ID Input
Note: The above list is related to models Epson C20 and C40 only. Other printer models may have different set of functions, and you must doublecheck the service manual for a specific printer that you are going to troubleshoot.Warning: misuse of a program may damage printer’s EEPROM! Under Window 98 only.

This service program can be Adjustment program epson downloaded FREE!
Today you can download FREE Service Programs:

Epson Stylus Color C41, C42 printer service program (under Windows 98 only) download (462kB) FREE!Epson Stylus Photo 900 printer service program (under Windows XP, 2000) download (571kB) FREE! Stylus Epson Stylus Color C60 printer service program (under Windows 98 only) download (609) FREE!
Service Adjustment Program Stylus Epson
Today you can download FREE Service Programs:

Epson Stylus Color type 480,580,680,777,780,790,860,1160,61,62,70,825
830,870,890,950,1270,1280, printer service program download (336) FREE!
This is the most downloads for reseters ( according to my downloads count )Just download at this link :
stylus photo C67 Download Free
stylus photo 510 Download Free
stylus cx3900 Download Free
stylus Photo R210 Download Free
stylus Photo R310 Download Free
stylus Photo C58 Download Free
stylus C60 Download Free
stylus Photo C59 Download Free
stylus Photo C20,40 Download Free
stylus Photo C41,42,43,44,45,46 Download Free
stylus Photo C61,62 Download Free
stylus photo C63,64 Download Free
stylus photo 83,84,85 Download Free
stylus photo C67,68 Download Free
stylus photo C65 Download Free
stylus Color 580 Download Free
stylus Color 680,777 Download Free
stylus photo C80,70 Download Free
stylus Color 780,790 Download Free
stylus Color 925 Download Free
stylus Color 1520,3000Download Free
stylus Collor 880 Download Free
stylus photo C90

Resetter Canon iP1600

•August 23, 2010 • Leave a Comment

Waste Ink Counter Reset.

Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect the printer cable.
4. Close door, then release power button.
this taken from